Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD Drilling Rig / Drill Rod / Drill Bit / Track Transporter / Drilling Mud Pump
Add to Cart
Characteristics:
1. Light in weight, easy relocation.
2. Adopting traversal winch, this will overcome the fault of wire arbitrary intertwine and quick wearing out of the winch laid in lengthways.
3. Belt transmission is adopted for the high speed level to make the drill soft in the uneven formation, and reduce the damage to the components and other mechanical failure.
4. In large spindle hole.
5. With wide speed range and large torquemoment in lower speed, it is suitable for engineering geological subterranean and water explorations.
6. The rig is stable in relocation and firmly for position.
7. Diesel engine or 22Kw electric motor for your selection.
| Drilling depth | m | 100 | 250 | 300 | 600 | |||||
| Drilling DI | mm | 300 | 200 | 150 | 75 | |||||
| Open hole DI | mm | 300 | ||||||||
| End hole DI | mm | 75 | ||||||||
| Drilling rod | mm | Φ60 | ||||||||
| Drilling angle | 90°-65° | |||||||||
| Rotary Spindle | ||||||||||
| Spindle forward speed | r/min | 30-1050 | ||||||||
| Spindle reverse speed | r/min | 29-137 | ||||||||
| Spindle stroke | mm | 560 | ||||||||
| Spindle inner diameter | mm | 96 | ||||||||
| Spindle lifting capacity | KN | 60 | ||||||||
| Main Winch ( drive hydraulic system) | ||||||||||
| Single line lifting speed | m/min | 0-45 | ||||||||
| Hug floodgate belt width | mm | 90 | ||||||||
| Tightrope diameter | mm | 14 | ||||||||
| Hoist single line lifting capacity | KN | 40 | ||||||||
| Roller diameter | mm | 200 | ||||||||
| Roller cubic measure | m | 30 | ||||||||
| Gear Oil pump | ||||||||||
| Duplex gear oil pump CBF-F63/25 | ||||||||||
| Front displacement/ pressure | 63mL/r 20Mpa | |||||||||
| Behind displacement/ pressure | 25mL/r 20Mpa | |||||||||
| Drilling rig Power | ||||||||||
| Diesel engine | Hp | R4105ZD 76HP | ||||||||
| Electric motor | KW | Y180L-4 22KW | ||||||||
