Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD Drilling Rig / Drill Rod / Drill Bit / Track Transporter / Drilling Mud Pump
Add to Cart
Small Volume Portable Mud Pump , BW 200 Diesel Mud Pump For Water Well Drilling
Product Introduction
The BW200 mud pump is a horizontal double cylinder reciprocating plug pump, mainly used for supplying flushing fluid to the borehole during core drilling. The flushing fluid can be mud or water. In order to adapt to the general drilling of alloys and steel particles, while also meeting the needs of small diameter diamond drilling, this pump is equipped with two types of cylinder liners with a diameter of 80 for alloy and steel particle drilling, and a diameter of 65 for small diameter diamond drilling. This pump can be used as a supporting equipment for drilling machines up to 1000 meters.
Technology Parameters
| Type | Horizontal type single-cylinder Double-action pump |
| Cylinder Diameter | 80/65 mm |
| Stroke | 85 mm |
| Reciprocate Times | 145 times/ minute |
| Displacement | 200 L/min |
| Pressure | 4-6 MPa |
| Volume Effiency | 80% |
| Transmisiion shaft speed | 530 rotations/min |
| Drive power | 20HP |
| Input pipe diameter | 65mm |
| Output pipe diameter | 37mm |
| Mass (including the engine) | 300 kg |
| Dimensions | 1050*630*820 mm |
BW200 Mud Pump Advantages
Model BW-200 mud pump is a kind of portable mud pump. The pump is a horizontal single cylinder double-acting pump.
1, Compact structure, light weight, small volume, beautiful appearance.
2, The design on the use of new ideas, new structure, new materials, new technology;
3, Loss of long life, high reliability
Main characteristics of grouting pump
1. It has four flow levels that can meet the needs of large and small caliber drilling rigs, with a wide range of flow adjustment and reasonable parameter selection. Can be used in conjunction with XY-4 core drilling rig and XY-5 drilling rig. It can meet the needs of drilling different diameters, depths, and geological cores.
2. The piston is a bowl shaped, self sealing S-type polyurethane rubber piston with a nylon backrest, greatly improving its service life.
3. There are five dust sealing rings on the pull rod to prevent mud from the hydraulic end from entering the power end and the lubricating oil filter at the power end. After multiple production tests, it has been proven that the sealing is reliable and the performance is good. Resulting in prolonged service life of gears.
4. The inlet and outlet valves are made of steel balls. And sound-absorbing rubber pads are installed on the valve cover to reduce impact noise.
5. The pressure gauge adopts BY-1 seismic resistant pressure gauge, with a long service life.
6. Compact structure and beautiful appearance.
7. Good detachable, easy to maintain and relocate.
