Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD Drilling Rig / Drill Rod / Drill Bit / Track Transporter / Drilling Mud Pump
Add to Cart
Full Hydraulic Geological Drilling Rig Machine Crawler Equipped for Mountain Geotechnical Investigation
Product Application:
ST-300 crawler drilling rig can be applied for different kinds of drilling technique methods and a variety of ground conditions. Especially in the difficult work condition, such as the incompact ground area, the gravel place, and the fragment rock stratum, this drilling can always provide the operator excellent solutions.
ST-300 Drilling Rig has already been widely used in boring not only the Geotherm hole and water well or water exploration hole; but also the drain hole and large tonnage prestressed anchoring hole of the geotechnical engineering, such as boreholes on side slopes of dams, railways, highways, etc.; pipe sheds drilling of the underground engineering; the grouting reinforcing hole drilling; the small foundation pile boreholes; and the drilling holes of landslide preventing and the treatment engineering of rock collapse.
Technical Parameter:
| Drilling Capacity | Drilling depth | m | 100/250/300/600 |
| Drilling Diameter | mm | 75/150/200/300 | |
| Open hole Diameter | mm | 300 | |
| End hole Diameter | mm | 75 | |
| Drilling rod | mm | Φ60 | |
| Drilling angle | 90°-65° | ||
| Spindle | Spindle forward speed | r/min | 30-1050 |
| Spindle reverse speed | r/min | 45-212 | |
| Spindle stroke | mm | 600 | |
| Spindle inner diameter | mm | 96 | |
| Spindle lifting capacity | KN | 30 | |
| Hoist | Single line lifting speed | m/min | 0.5-1.9 |
| Hug floodgate belt width | mm | 90 | |
| Tightrope diameter | mm | 12.5 | |
| Hoist single line lifting capacity | KN | 30 | |
| Reel caliber | mm | 305 | |
| Reel cubic measure | m | 30 | |
| Oil pump | Front displacement, pressure | 63mL/r 20Mpa | |
| Behind displacement, pressure | 25mL/r 20Mpa | ||
| Drilling rig power | Diesel engine | Kw | 60 |
| Electric motor | Kw | 22 | |
| Mud pump | Flow rate | L/min | 250 |
| Working pressure | Mpa | 7 | |
| Water inlet diameter | mm | 75 | |
| Water outlet diameter | mm | 50 | |
| Power | Diesel Engine | KW | 60 |
| Motor | KW | Y180L-4 22 | |
| Wheeled Plate carrying capacity | T | 3.5 | |
| Wheel plate Length | m | 2.6 | |
| Wheel plate Width | m | 2 | |
| Wheel plate Height | m | 0.6 |
