
Add to Cart
Four Wheel Basement Exploration Core Drill Rigs Drilling Rig For Geological
Geological Drilling Rig Machine brief introduction
The core drilling rig is a wide range of lightweight core drilling rigs that are small, lightweight and easy to handle. Suitable for geological survey of railways, water conservancy, bridges, foundations and other buildings, geological core drilling, small grouting holes, blasting holes, water well drilling. According to the formation, diamonds, composite sheets and alloy drill bits are selected for drilling.
Geological Drilling Rig Machine parameter
Drilling depth | 200m |
Open hole diameter | 75-300mm |
End hole diameter | 75mm |
Active drill rod | 53/59*4200mm |
Rod diameter | 50,60mm |
Drill angle | 90°-75° |
Matched power(diesel power) | 15kw/2200r/min |
Dimension | 2800*950*1700mm |
Geological Drilling Rig Machine Product Application:
1. Drillings for the general exploration and investigation of solid mineral deposit, engineering geotectonic survey and concrete structure inspection holes.
2. Diamond drill bit, alloy drill bit and steel roller drill bit and so on are available for drilling according to different geological structures.
3. When the final holes are respectively 75mm and 46mm in diameter, the rated hole depths are separately 100m and 180m. The maximum of depth may not exceed 110% of that drilled in each hole. The maximum allowable hole diameter is 150 mm.
Advantage of this drilling machine:
1,Adopt auto vehicle transmission and cluth,good speed gear,easy operation.
2,Taper clutch with outstanding transmission torque, easy operation and maintenance-free features
3,With light structure,easy disassemble,convenient to move.
4,Four sets of bearing positioning of the vertical axle box ensure that the gyrator has sufficient rigidity to deal with complex geological conditions such as gravel layer and pebble layer.