Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD Drilling Rig / Drill Rod / Drill Bit / Track Transporter / Drilling Mud Pump
Add to Cart
150 Meter Crawler Hydraulic Geological Drilling Rig Full Hydraulic Drill Rig
Introduction to drilling rig:
Water well drilling rig is one of the most common equipment in various industries, all of our drilling rigs here are multifunctional, it can be used with air compressor, mud pump, even we can just use the dry hydraulic drilling method. The drilling rigs are not only designed for water drilling, they are widely used in industrial and agriculture water project, testing well and other exploration borehole. In particular, drilling hole for geothermal heating, it can also meet the engineering basis for reinforcement, loose gravel drilling rock formation connected with a variety of engineering. Our drilling rigs are more efficiency and with low failure rate, more economic and durable, and with a high comprehensive cost performance.
Features of drilling rig:
XY-1A series hydraulic drilling rig is a light weight drilling rig, widely used in general geological exploration of railway, road, bridge, dam and tall building base, geological core drilling, small grouting holes, blasting holes, civil wells, and earth central air conditioning wells, etc.
1, Fed by hydraulic cylinder, the drilling efficiency is higher, and it can save labor.
2,Equipped with national patented technology-taper clutch, it could achieve strong torque transmission, easy maintenance and free maintenance.
3,Vertical spindles are fixed by four groups of bearings to ensure that the rotator has enough rigid for gravel layer and other complex geological conditions.
Rig parameters:
| Model | XY-1A |
| Drilling Depth | 150m |
| Drilling Diameter | 75-250mm |
| Drill Pipe Diameter | 42-60mm |
| Drive Power | 13.2 KW |
| Weight | 740kg |
| Overall Dimension | 2.4*0.8*1.4m |
| Vertical Shaft | |
| Rotating Speed | 142/285/570r/min |
| Stroke | 450mm |
| Winch | |
| Max Pull Force | 20kN |
| Pull Speed | 0.41-1.64m/s |
| Rope Dia | 9.3mm |
| Drum Capacity | 27m |
| Drill Mast | |
| Rated Load | 18T |
| Height | 6.5 |
| Mud Pump | |
| Displacement | 95L/min |
| Working Pressure | 12 Bar |
| Times/min | 93 |
| Inlet Pipe Diameter | 51mm |
| Outlet Pipe Diameter | 32 mm |
