
Add to Cart
ST 200 Large Engine Pneumatic Deep Drilling Rig Machine
ST 200 Pneumatic Drilling Rig Product Description
The rig can create drilling jobs in different strata, borehole diameter can up to 245-294mm. The rig with hydraulic technology,supporting high torque hydraulic motor rotation and large bore hydraulic cylinder push, the multi cylinder engine of famous factory provides power for the hydraulic system, two stage air filter, air compressor air intake design, prolong the service life of diesel engine. Special pump set design is convenient for maintenance and reduce the cost of maintenance. Centralized control of the hydraulic control table, convenient operation.
ST 200 Pneumatic Drilling Rig Tech Details
Drilling Rig Model | ST 200 |
Condition | New |
Drilling Rigs | 200 Meters |
Power Type | Diesel |
Origin | China |
Brand Name | Shitan |
Usage | Water Well Drilling |
Dimension(L*W*H) | 6400MM*2250MM*2700MM |
Weight | 5800KG |
Certification | ISO9000 |
Warranty | 1 YEARS |
Marketing Type | New Product 2020 |
Drilling diameter | 90-152mm |
Depth | 25M |
Rotary speed | 0-90rpm |
DTH | K40 |
Drilling Rods | 76*2m+76*3m |
Air consumption | 13-20m3/min |
taavelling speed | 0-2.5km/h |
ST 200 Pneumatic Drilling Rig Advantages
1)Greater fuel efficiency and energy saving
2) Air filtration system with vacuum indication for dust environments
3) Compressor oil and engine coolant coolers to optimize performance and extend engine life
4) Efficient compressor oil filter
5) Fuel filter with water separator
6)Easy to remove, translucent PE fuel tank
ST 200 Pneumatic Drilling Rig Application Scope
ST 200 water well drilling rig can be applied to various strata, used in water well engineering, geothermal well, anchor pile holeand so on, and can be used with follow-pipe drilling. It has the advantages of whole machine hydraulic control, automatic loading and unloading drill pipe, crawler type chassis, large horsepower diesel engine, four hydraulic support leg balance, stronger terrain application ability and so on.
How to seek water source?
First, according to the geographical location, it is well known that water flows to the place. As the saying goes, it is most beneficial to find water in the pinch land surrounded by mountains on three sides. Because of the low-lying terrain, the groundwater will flow to the pinch mouth. There is a high probability of drilling wells near the pinch mouth to get water. The two ditches intersect, and the spring water is choppy, that is, there may be water accumulation under the mountain mouth at the intersection of the two ditches. Second, check the vegetation nearby. You will find that where there is water, there will be plenty of trees and flowers. The more vigorous the crops are, the more mature the other crops planted at the same time. This area is still booming. Drilling wells in this place can basically hit the water vein. The ground freezing and thawing condition is seen under the three buildings, because the groundwater is four or five meters away from the ground, so the ice on the ground will be very thin in winter. In summer, due to the hot weather, there is a thin water layer or wet place in the morning and evening, which is also atomized by the underground and preheater.