Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD Drilling Rig / Drill Rod / Drill Bit / Track Transporter / Drilling Mud Pump
Add to Cart
150 Meters Geo-tech Engineer Mineral Exploration Core Drilling Rig
Xy-1a Exploration Core Drilling Rig Introduction
Xy-1a drilling rig is a hydraulic feed portable drilling rig, which is suitable for engineering geological exploration of industrial and civil buildings, railways, hydropower, transportation, bridges, dam foundations and other buildings.Suitable for work in plains or hilly areas. Equipped with trailer structure or loaded on the track chassis with strong maneuverability.
Xy-1a Exploration Core Drilling Rig Parameters
| Technical Parameters | |
| Item | Parameter |
| Drilling Depth | 150m |
| Drill Pipe Diameter | Φ42mm |
| Vertical Shaft Speed | Forward:61;163;338;654 |
| Reverse:45 | |
| Vertical Shaft Torque | 1200Nm |
| Lifting Force of Vertical Shaft | 25KN |
| Feed Force of Vertical Shaft | 20KN |
| Vertical Axis Stroke | 500mm |
| Vertical Shaft Through Hole Diameter | Φ46mm |
| Hoisting Single Rope Maximum Lifting Force | 15KN |
| Wire Rope Diameter | Φ9.3mm |
| Boost Speed | 0.2;0.52;1.05;2.06m/s |
| Power Configuration | Motor Y160M-4(11KW) |
| Diesel Engine S1100(12.1KW) | |
| Dimensions (Length × Width × Height) | 1450×970×1280mm |
| Weight (Excluding Power) | 500kg |
Xy-1a Exploration Core Drilling Rig Advantage
(1) Easy operation and high efficiency with the hydraulic feeding
(2) As the ball type chuck and the driving rod, it can complete no-stopping rotating while the spindle relit
(3) The pressure indicator of bottom hole can be observed and the well conditions controlled easily
(4) Close levers, convenient to operate, safe and reliable
(5) Compact size and light in weight, easy to assemble, disassemble and transport, suitable for plains and mountain area.
(6) The octagon shape section spindle can give more torque.
Xy-1a Core Drilling Rig Application Range
(1)Geological exploration, engineering geology investigation and kinds of survey holes in concrete structures.
(2)Diamond bits, hard metal bits and steel-shot bits could be selected to different layers.
(3)The rated drilling depth is 100m using dia. 75mm bit, and 180m using dia. 46mmbit.
The drilling depth cannot exceed 110% of its capacity. The allowable maximum diameter of initial hole is 150mm.
Drilling Rig Maintenance Points
When the drilling rig stops working for a short time, a small amount of air pressure shall be given to prevent sediment from invading the interior of the percussion device of the drilling rig. If the drilling rig stops working for a long time, the percussion device shall be lifted 1-2m away from the hole bottom for fixation
