Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD Drilling Rig / Drill Rod / Drill Bit / Track Transporter / Drilling Mud Pump
Add to Cart
150M Water Well Drilling Machines Durable Fast Speed Portable Exploration Rig
XY-1A 150 Water Well Drilling Rig Product Description
XY-1A is a kind of medium shallow hole core drilling machine. The utility model has the advantages of small size, light weight, large power and wide range. It is especially available for constructions of hydroelectric power station, highway, railroad and harbor etc.
XY-1A 150 Water Well Drilling Rig Specifications
Content | Parameter | Content | Parameter | ||
Drill | Hoist | ||||
Drilling depth | 100, 180m | Max. Lifting Capacity (single rope) | 15KN | ||
Initial hole dia. | 150mm | Lifting Rotating Speed | 36, 76, 121r/min | ||
Final hole dia. | 75, 46mm | Hoisting Drum Linear Velocity (2 Levels) | 10, 20, 44, 88m/min | ||
Drill rod dia. | 42, 43mm | Drum Dia. | 140mm | ||
Angle range | 90º～75º | Wire Rope Dia. | 9.3mm | ||
Dimensions (L×W×H) | 1620×970×1560(mm) | Wire Rope Capability | 35m | ||
Weight (Without Power Unit) | 620kg | Brake Dia. | 252mm | ||
Stroke | 350mm | Brake Belt Width | 50mm | ||
Swivel Head | Oil Pump | ||||
Spindle Speed(5-Speed) | 140, 295, 470, 790, 1010 (r/min) | Model | YBC-12/125 | ||
Spindle Stroke | 450mm | Rated Presure | 12.5MPa | ||
Spindle Pull-down max. | 15KN | Displacement | 8ml/r | ||
Spindle Lifting Capacity max. | 25KN | Rated Speed | 800～2500r/min | ||
Upward Displacement Speed of Idling Vertical Spindle | 3m/min | Power (Diesel Engine or Motor) | |||
Downward Displacement Speed of Idling Vertical Spindle | 4m/min | Model (Diesel Engine) | ZS1100 | ||
Rated Power | 12.1KW | ||||
Rated Speed | 2200r/min | ||||
Model (Motor) | Y160M-4 | ||||
Rated Power | 11KW | ||||
Rated Speed | 1460r/min | ||||
XY-1A 150 Water Well Drilling Rig Main Features
1. Very powerful at soil, sand, hard rock, etc. land condition.
2. Three kinds drill bits (three-wing bit, alloy bit and diamond bit) available for your choice, which can drill both soft and hard ground, especially
diamond drill bit effective in drilling hard rocks.
3. Hydraulic control system for greatly improving the working efficiency, saving labor force.
4. Mounted wheel or trailer, can be hauled easily by car or tractor, convenient to transport.
5. Power can be diesel engine or electric motor, as per your request.
What aspects should we pay attention to in the drilling process of water well drilling rig?
Bit plays a very important role in the drilling of water well drilling rig, but the quality of a bit directly affects the efficiency and quality of water well drilling. Therefore, in the selection process, we should pay attention to the selection and use of lower bit. When we are operating the drill bit, we must pay attention to several aspects in order to better production and operation.
1. After the drilling structure of the drill bit of the water well drilling rig is drilled, the central drilling tool needs to be replaced in time. First, the hole bottom needs to be cleaned, and then the residue at the hole bottom needs to be blown away. After the drill bit stops rotating, the drilling tool in the water well drilling rig can be lifted up slowly. When the lifting force is just enough to lift the drilling tool, it is the most appropriate.
2. During the drilling process, the drill bit of the water well drilling rig shall be summarized. It is also necessary to carefully observe the follow-up situation of the casing, timely understand the specific situation in the hole, and keep the hole clean when necessary. Moreover, the drill bit in the water well drilling rig shall not be pulled out by force during the drilling process.
3. Sometimes there will be more residual rock slag at the bottom of the hole of the water well drilling rig, and the rotating part of the eccentric bit will be stuck by the rock slag, which will affect its retraction and production. At this time, it is necessary to transport air pressure, clean the hole again, make the DTH hammer work in a short time, and then lift the central drilling tool again.